[MH_Resizing] Find address

Find address with Cheat Engine.

My English is SO BAD. (using google translate)

I use the 6.8.1 version of the Cheat Engine.
  1. Down load this.  Link. (made by {-.-} Kaiket {-.-})
  2. Change brightness to minimum in MHW. (use left arrow)
  3.  Open Cheat Engine and find MHW process.
  4.  Load [mhw_ultrawide.ct] file in CE
  5.  Change Value Type [Array of byte], Check Hex
  6.  Scan this.
    7. .. .. 00 00 .. .. 00 00 .. .. 00 00 .. .. 00 00 .. .. 00 00 .. .. 00 00 .. .. 00 00 .. .. 00 00 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 9a 99 99 3f .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 00 00 80 3f 00 00 80 3f 00 00 80 3f .. .. .. .. 00 00 80 3f 00 00 80 3f 00 00 80 3f
  7. You found one or more.
  8. Right click on "ArrayToOffsetFrom", next "Recalculate new addresses"
  9. Click "Change to address"
  10. Fill one.
  11. If you find correct address, you will see like this.
  12. Open calculator, and switch to programmer.
  13. Click HEX, type correct address - 120.
  14. Remember this result value. (or Writing)
  15. Click "Add Address Manually" in CE, and type Address(Result in 13).
  16. Right click the added value. Click "Find out what accesses this address"
  17. When the window opens, select the list and click More information.
  18. Remember this address.
  19. Change Value type (4 Bytes), Type Address(Result in 18), And Scan.
  20. You must see GREEN VALUE. (Green value is Static address)
  21. Add green value.
  22. Right click "Change record"->"Address" of Added Value.
  23. You found the address.
  24. This value is used in [config.ini].

댓글 5개:

  1. Nisekoi2018년 11월 9일 오전 5:11

    I don't know if I made a mistake. The last three steps hope to be more detailed.
    I strictly followed your steps and successfully obtained a green address, but could not use it.

    답글삭제
  2. Nisekoi2018년 11월 9일 오전 5:14

    After getting the green address, I clicked on add address manually and filled in the green address. Then right click on the added address and click the "address" button according to your method. The final interface is different from yours. The value inside is exactly the same as the green address I added.

    답글삭제
  3. MoQU2018년 11월 10일 오전 7:38

    21. Add green value.
    -> Double click on the value to add it.

    22. Right click "Change record"->"Address" of Added Value.
    -> If added, there is a value added at the bottom.
    -> Right click on this value

    답글삭제
  4. Nisekoi2018년 11월 11일 오전 2:27

    답장을 보내 주셔서 감사합니다. 답장을 바탕으로 문제를 성공적으로 해결했습니다. 15 단계의 방법을 사용하여 추가했는데, 이것이 내가 실패한 이유입니다.

    Thank you for your reply, I successfully solved the problem based on your reply, I used the method of step 15 to add, which is the reason for my failure.

    답글삭제
  5. Nhi2019년 1월 2일 오후 8:07

    Please help !
    On Step 5. Change Value Type [Array of byte], Check Hex

    There is no address in the box to scan after I changed the Value Type to [Array of byte]. What should I enter into the box, type the address from your picture into the box ?

    답글삭제

홈
피드 구독하기: 글 (Atom)